Do you get irritated when acrobat reader takes 5/10 seconds to load when you want to open a pdf document. There is a way to speed up the loading.
1. Go to the installation folder of acrobat reader
(C:\program files\adobe\acrobat\reader\.. whatever)
2. Move all the files and folders from the "plugins" directory to the "Optional" directory. (I repeat.. cut and paste the files NOT copy & paste).
Also make sure that acrobat reader is not open else it will lock the files and not allow you to move the files).
Now your acrobat reader will load very fast
and almost as good as notepad..
Block Websites without Any Software
Steps:
1. Browse C:\WINDOWS\system32\drivers\etc
2. Find the file named "HOSTS"
3. Open it in notepad
4. Under "127.0.0.1 localhost" Add 127.0.0.2 www.orkut.com and that site will no longer be accessible.
5. Done!
Examples:
127.0.0.1 localhost
127.0.0.2 www.orkut.com
- www.orkut.com is now inaccessible.
For every site after that you want to add, just add "1" to the last number in the internal ip (127.0.0.2) and then the addy like before.
IE:
127.0.0.3 www.yahoo.com
127.0.0.4 www.msn.com
127.0.0.5 www.google.com
This also works with banner sites, just find the host name of the server with the banners and do the same thing with that addy.
1. Browse C:\WINDOWS\system32\drivers\etc
2. Find the file named "HOSTS"
3. Open it in notepad
4. Under "127.0.0.1 localhost" Add 127.0.0.2 www.orkut.com and that site will no longer be accessible.
5. Done!
Examples:
127.0.0.1 localhost
127.0.0.2 www.orkut.com
- www.orkut.com is now inaccessible.
For every site after that you want to add, just add "1" to the last number in the internal ip (127.0.0.2) and then the addy like before.
IE:
127.0.0.3 www.yahoo.com
127.0.0.4 www.msn.com
127.0.0.5 www.google.com
This also works with banner sites, just find the host name of the server with the banners and do the same thing with that addy.
Using Bluetooth without Installing Software in PC
You don't need to install any software for your bluetooth device.
You already had it in your window xp and vista
it can be used as:-
1. open d run command
2. now type 'fsquirt'
wid-out quotes
3. now just select whether you want to send or receive new file
You already had it in your window xp and vista
it can be used as:-
1. open d run command
2. now type 'fsquirt'
wid-out quotes
3. now just select whether you want to send or receive new file
How to Remove Your Pendrive Virus
This is a simple batch file. It's used prevent the computer from getting the pendrive virus. It's a prevention method; not a disinfection method.
But disinfect your pen drive alone.
First the virus is disinfected, then opening the pen drive using explorer. It's always good idea to open the content after deleting the virus.
00 k: [pen drive mount point]
01 attrib -s -h -r *
02 attrib -s -h -r /S /D *exe
03 del *inf
04 del new*exe
05 del reg*exe
06 del *ill*vbs
07 explorer k:\ [pen drive mount point]
in line 01 you are making the virus attribute to delete.
then deleting malwares using some wild cards, etc.,
make it as a batch file and use it to access the pen drive.
As a hacker one should capable of removing the virus manually. Not using the Anti Virus tools.
Do you think it's easy to delete the virus just by delete key. Even you deleted it SOME VIRUS MAY NOT DELETE. Some virus are WRITE PROTECTED.
so use this given below commands
K:\New Folder>attrib -s -h -r /S /D *exe
K:\New Folder>DEL /S *exe
Deleted file - K:\New Folder\new.exe
Deleted file - K:\New Folder\New Folder\new.exe
use wildcards and flas the extract the virus file.
Save the "any.exe" [normal your file] as "any" without extension. when using copy system where you need and change extension by just renaming.
use effective and simple way people. This also erases the "write-protected" virus.
But disinfect your pen drive alone.
First the virus is disinfected, then opening the pen drive using explorer. It's always good idea to open the content after deleting the virus.
00 k: [pen drive mount point]
01 attrib -s -h -r *
02 attrib -s -h -r /S /D *exe
03 del *inf
04 del new*exe
05 del reg*exe
06 del *ill*vbs
07 explorer k:\ [pen drive mount point]
in line 01 you are making the virus attribute to delete.
then deleting malwares using some wild cards, etc.,
make it as a batch file and use it to access the pen drive.
As a hacker one should capable of removing the virus manually. Not using the Anti Virus tools.
Do you think it's easy to delete the virus just by delete key. Even you deleted it SOME VIRUS MAY NOT DELETE. Some virus are WRITE PROTECTED.
so use this given below commands
K:\New Folder>attrib -s -h -r /S /D *exe
K:\New Folder>DEL /S *exe
Deleted file - K:\New Folder\new.exe
Deleted file - K:\New Folder\New Folder\new.exe
use wildcards and flas the extract the virus file.
Save the "any.exe" [normal your file] as "any" without extension. when using copy system where you need and change extension by just renaming.
use effective and simple way people. This also erases the "write-protected" virus.
Make Your Own Radio Station
Requirements:
1) Go to www.shoutcast.com
2) Install them in any order. Go to START>PROGRAM FILES>SHOUTcast DNAS>EDIT SHOUTCAST DNS CONFIG.
3) Now Configure it:
Go Down and where it says password: change (that means you will have to change it to whatever, make sure you remember)
The Portbase: change it to whatever port you want it
Maxusers:(let's be realistic here, don't put in 10000, like NXS's radio station) your bandwidth has to be extremely good, if your cable, 50 user max is ok, ADSL should stay below 10 users, and T1 connections should do whatever tickles there fantasy.
4) Open winamp, RIGHT CLICK>OPTIONS>PREFERENCES>DSP EFFECT> and choose the NULLSOFT SHOUTCAST.
5) Go to OUTPUT, and then click on Connection, Through the ADDRESS, type your address which you have done through www.no-ip.com , PORT NUMBER, whatever you did in the EDIT.txt, and your password.
6) Then go to Encoder, and choose your quality of your music. Go back to OUTPU>OUTPUT CONFIG> YELLOW PAGES. This is your advertisement information. Do whatever you like there.
7) Now Connect. To check that your Radio os on-line go to http://(your address that you added in the preference)
- Winamp(Any version)
- Internet speed(256Kbps)
- a domain, an updated one with the current i.p active.
- Now, You will have to download the Shoutcast Files.
1) Go to www.shoutcast.com
2) Install them in any order. Go to START>PROGRAM FILES>SHOUTcast DNAS>EDIT SHOUTCAST DNS CONFIG.
3) Now Configure it:
Go Down and where it says password: change (that means you will have to change it to whatever, make sure you remember)
The Portbase: change it to whatever port you want it
Maxusers:(let's be realistic here, don't put in 10000, like NXS's radio station) your bandwidth has to be extremely good, if your cable, 50 user max is ok, ADSL should stay below 10 users, and T1 connections should do whatever tickles there fantasy.
4) Open winamp, RIGHT CLICK>OPTIONS>PREFERENCES>DSP EFFECT> and choose the NULLSOFT SHOUTCAST.
5) Go to OUTPUT, and then click on Connection, Through the ADDRESS, type your address which you have done through www.no-ip.com , PORT NUMBER, whatever you did in the EDIT.txt, and your password.
6) Then go to Encoder, and choose your quality of your music. Go back to OUTPU>OUTPUT CONFIG> YELLOW PAGES. This is your advertisement information. Do whatever you like there.
7) Now Connect. To check that your Radio os on-line go to http://(your address that you added in the preference)
Temporary Email Accounts
If you are in need of disposing your email often, then there are certain sites that can give you free email and these emails will be disposed in some minutes. If you are about to sign in into a site which requires an email and you are afraid to give your original email id and then you can get an email id from this site for free.
Remember the email will be disposed in 10 minutes. So, be quick to get your emails and dispose the temporary email.
Here is the site:
Temporary email accounts
http://www.xyzfree.net/
Remember the email will be disposed in 10 minutes. So, be quick to get your emails and dispose the temporary email.
Here is the site:
Temporary email accounts
http://www.xyzfree.net/
How to Use Trial Softwares Forever in a Legal Way
Well friends most of us are in the need of using the trial softwares. But we are not intended to buy them, instead we generally go for using patches, serial numbers and many more things such as the use of key generators etc. But I have found an interesting way where you can use the trial softwares for ever.
If you download and install a trial software, it will expire in 30 days or so. Even if you uninstall and reinstall they will say "your trial period has ended". We can fix this. Just go to google and download a trial version or full version of any registry cleaners. Then install and run them. Then your registry will be cleaned up. Now you can again install the trial software and run for another 30 days and at the end repeat the process. So we don't need serial keys and no alerts from our antivirus try and enjoy.
If you download and install a trial software, it will expire in 30 days or so. Even if you uninstall and reinstall they will say "your trial period has ended". We can fix this. Just go to google and download a trial version or full version of any registry cleaners. Then install and run them. Then your registry will be cleaned up. Now you can again install the trial software and run for another 30 days and at the end repeat the process. So we don't need serial keys and no alerts from our antivirus try and enjoy.
How to Hibernate Windows
Go to Start button>Control panel >performance & maintenance>Power Options>Hibernate Tab>Enable Hibernation
You have to enable hibernation as shown in the figure. Click Apply and then Ok. Now you have enabled hibernation successfully.
Hibernating the Computer (XP)
While you are turning the computer off then you will see standby option.
If you press shift key then you will get something like this:
Now we can click on hibernate and then switch the computer.
Note: Hibernating helps us to switch on or off the computer quickly if we are leaving urgently. Hibernating consumes some space.
You have to enable hibernation as shown in the figure. Click Apply and then Ok. Now you have enabled hibernation successfully.
Hibernating the Computer (XP)
While you are turning the computer off then you will see standby option.
If you press shift key then you will get something like this:
Now we can click on hibernate and then switch the computer.
Note: Hibernating helps us to switch on or off the computer quickly if we are leaving urgently. Hibernating consumes some space.
How to Increase Speed of Aircel GPRS
Well friends now I am going to share the things on how to increase the speed of the aircel gprs. The main reason for the speed is the type of the phone you use. If you are using an expensive phone then you may want to get a high speed. Apart from this you can also use some softwares such as internet cyclone to boost your speed. It is the best one to improve the speed of aircel gprs. So, use it to increase the speed of aircel gprs.
Some of the features of internet cyclone are;
- Boost your speed to 200% by optimizing your settings
- It is compatible with all type of modems and high speed internet connections such as Lan, Isdn, Cable, Dsl, T1 and others
- You can surf, download and email faster using this software.
Some of the features of internet cyclone are;
- Boost your speed to 200% by optimizing your settings
- It is compatible with all type of modems and high speed internet connections such as Lan, Isdn, Cable, Dsl, T1 and others
- You can surf, download and email faster using this software.
Getting Disconnected Suddenly while Using Aircel GPRS
I have seen some people who are facing with some problems such as getting disconnected suddenly while using aircel gprs. The solution for this is very simple. This is because of you might get a call or SMS while you are using the pocket internet. If you still live the problem of disconnecting, the best idea is to restart the phone. Then you will be connected again.
Here is the tip for the korean mobiles: you can just sms PI to 121 to get the settings.
Here is the tip for the korean mobiles: you can just sms PI to 121 to get the settings.
How to Watch Flagged Videos in YouTube
Some countries will not allow the users to watch certain videos (i.e.) these videos may be flagged for some reason. In such cases, you can follow the tip to view them without the use of any software or installation.
Now see the following link (this is an example):
http://www.youtube.com/watch?v=x
Did you see the symbol "=" in the above link? Replace this with the symbol "/"
So, the URL will look like this: http://www.youtube.com/v/x
This trick will work with the videos having the following message: This video or group may contain content that is inappropriate for some users, as flagged by YouTube’s user community.
Now see the following link (this is an example):
http://www.youtube.com/watch?v=x
Did you see the symbol "=" in the above link? Replace this with the symbol "/"
So, the URL will look like this: http://www.youtube.com/v/x
This trick will work with the videos having the following message: This video or group may contain content that is inappropriate for some users, as flagged by YouTube’s user community.
How to Remove an Extra OS from Boot Menu?
If one of our operating systems have been crashed we will be installing another one. In that case, the corrupted operating system will remain at the top and will always disturb us. To avoid such a problem, here is a tip to remove it:
1. Go to Start>Control Panel>System>Advanced.
2. See in Startup and Recovery, click on the Settings.
3. In the Default Operating System, choose anyone of the following:
"Microsoft Windows XP Professional /fastdetect"
-or-
"Microsoft Windows XP Home /fasdetect"
-or-
"Microsoft Windows 2000 Professional /fastdetect"
4. Take the checkmark out of the box for "Time to display a list of Operating Systems".
5. Click Apply and Ok, and reboot the system.
*If you wish to edit the boot.ini file manually, click on the button "EDIT"
NOTE: press F5 while booting for these menu in BOOT MENU at that time.
1. Go to Start>Control Panel>System>Advanced.
2. See in Startup and Recovery, click on the Settings.
3. In the Default Operating System, choose anyone of the following:
"Microsoft Windows XP Professional /fastdetect"
-or-
"Microsoft Windows XP Home /fasdetect"
-or-
"Microsoft Windows 2000 Professional /fastdetect"
4. Take the checkmark out of the box for "Time to display a list of Operating Systems".
5. Click Apply and Ok, and reboot the system.
*If you wish to edit the boot.ini file manually, click on the button "EDIT"
NOTE: press F5 while booting for these menu in BOOT MENU at that time.
Submitting Site to Bing
Bing is the new search engine developed by Microsoft. Current states tell that it is the next search engine to google. Bing is playing a major role in driving traffic to the sites. So, increase your chances of getting your website in Bing by following the rules that have been illustrated below:
1) Go to Bing Webmaster’s page and login by your Windows live ID.
2) Click on "Add a site" button and enter your Blog/Site address, sitemap address and submit.
3) It will open a new page asking for verification. You can do that by uploading a xml file to root folder of your site or inserting a <*meta*> tag to your Blog’s Head section.
4) Wait for few days. Bing will start crawling your Blog's pages. This will help you to rank higher in search results.
You can add your blogs in Bing just by following the simple steps:
1) Sign in to your blogger account.
2) Choose layout-->edit html
3) Search for<> tag and put your meta tag there (Place your meta tag after the<> tag...)
For Google:
1) Go to google webmaster (you can see it at the bottom of the blogger account).
2) Login into webmaster account.
3) You will get the tag by adding site into google.
1) Go to Bing Webmaster’s page and login by your Windows live ID.
2) Click on "Add a site" button and enter your Blog/Site address, sitemap address and submit.
3) It will open a new page asking for verification. You can do that by uploading a xml file to root folder of your site or inserting a <*meta*> tag to your Blog’s Head section.
4) Wait for few days. Bing will start crawling your Blog's pages. This will help you to rank higher in search results.
You can add your blogs in Bing just by following the simple steps:
1) Sign in to your blogger account.
2) Choose layout-->edit html
3) Search for<> tag and put your meta tag there (Place your meta tag after the<> tag...)
For Google:
1) Go to google webmaster (you can see it at the bottom of the blogger account).
2) Login into webmaster account.
3) You will get the tag by adding site into google.
How to View Contents of Rar File Before Downloading
Most of the files we download from the Internet are in Zip or Rar format.
We wouldn't like if we download an archive to find that the file we are looking for is not there. It is also such a waste of bandwidth and time to download a whole archive just for a single file.
Archview is a Firefox addon that lets you preview the contents of an Archive before downloading. You can even download a single file from the archive. Currently it supports only RAR, ZIP and ISO format but that should be enough as they are the 2 most popular and common formats being used today.
Archview adds itself to the stats bar and becomes active when the user clicks on a zip or rar link. It displays the contents almost instantly and presents the files of the archive in an XML or HTML interface.
And what’s more, it even lets you download individual files for an archive, now no need to download a 10 MB archive for a file of 100 Kb that is inside.
Link: https://addons.mozilla.org/en-US/firefox/addon/5028
We wouldn't like if we download an archive to find that the file we are looking for is not there. It is also such a waste of bandwidth and time to download a whole archive just for a single file.
Archview is a Firefox addon that lets you preview the contents of an Archive before downloading. You can even download a single file from the archive. Currently it supports only RAR, ZIP and ISO format but that should be enough as they are the 2 most popular and common formats being used today.
Archview adds itself to the stats bar and becomes active when the user clicks on a zip or rar link. It displays the contents almost instantly and presents the files of the archive in an XML or HTML interface.
And what’s more, it even lets you download individual files for an archive, now no need to download a 10 MB archive for a file of 100 Kb that is inside.
Link: https://addons.mozilla.org/en-US/firefox/addon/5028
What is SSL and How to Get It?
The full form of ssl is secure socket layers. This tells the safety of the internet. This conveys some messages with your site before you enter into it. SSL will then send some short messages to your browser which makes the browser easy to understand about the site. All the conversations between your browser and the site are encrypted. So, any third party can not get any information between you and the site. This is the reason why the conversations between the site and the servers takes place slowly. We are getting the safety due to the encryption. We can find whether the site is secure or not by seeing the https:// . If the site is secure then it displays the following https:// otherwise like the normal site http://
I have explained about these https in the previous posts.
I have explained about these https in the previous posts.